LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1443 (Anti-Lock Brake System - Vehicle Dynamic Systems) >> Removal And Installation >> Wheel Speed Sensor Ring - Front >> Removal

Wheel Speed Sensor Ring - Front: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front hub and bearing assembly. For additional information, refer to FRONT SUSPENSION .
  2. Using the Pinion Bearing Cone Remover and the Wheel Speed Sensor Ring Installer, remove the front wheel speed sensor ring from the front hub.
    3. Fig 1: Identifying Special Tools (205-D002 And 206-D41)
    GF0015409Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals