LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1439 (Rear Disc Brake System) >> Removal And Installation >> Rear Disc Brake >> Removal

Rear Disc Brake: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire. For additional information, refer to WHEELS AND TIRES article.
    2. CAUTION: Care must be used when servicing rear brake components without disconnecting the parking brake cable from the brake caliper lever. Carefully position the caliper aside using a suitable support or damage to the parking brake cable end fittings may occur.
    CAUTION: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose may occur.
  2. Remove and discard the 2 anchor plate bolts and position the brake caliper anchor plate and brake caliper assembly aside.
    • Support the caliper using mechanic's wire.
  3. Remove the brake disc.
scientia non olet · About LEMON Manuals