LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1439 (Rear Disc Brake System) >> Removal And Installation >> Rear Brake Caliper Anchor Plate >> Removal

Rear Brake Caliper Anchor Plate: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake pads. For additional information, refer to Brake Pads .
  2. Remove the 2 brake caliper anchor plate bolts and the brake caliper.
    • Discard the bolts.
scientia non olet · About LEMON Manuals