Power Steering Pump Pulley - 4.6L, 5.4L: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

4.6L engine

Remove the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING .

4.6L and 5.4L engines

Rotate the tensioner and remove the accessory drive belt from the power steering pump pulley.
Using the Power Steering Pump Pulley Remover, remove the pulley.

Fig 1: Removing Pulley Using Special Tool 211-016

Courtesy of FORD MOTOR CO.