LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1436 (Information Center - Instrument Cluster (Ic), Message Center, & Warning Chimes) >> General Procedures >> Belt-Minder® Deactivating/Activating >> Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Belt-Minder® can also be configured on or off using the scan tool.
  1. Before deactivating/activating the Belt-Minder®, set the parking brake.
  2. Place the gearshift in PARK (P) (automatic transmission) or the NEUTRAL (N) position (manual transmission).
  3. Place the ignition switch in the OFF position.
  4. Unbuckle the driver and passenger safety belt.
scientia non olet · About LEMON Manuals