Component testing procedure
WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Horizontal circuit | 5 and 4 9 and 3 |
Forward | Closed circuit |
| Closed circuit | |||
| 5 and 9 4 and 3 |
Rearward | Closed circuit | |
| Closed circuit | |||
| Front Height circuit | 5 and 2 6 and 3 |
Up | Closed circuit |
| Closed circuit | |||
| 5 and 6 2 and 3 |
Down | Closed circuit | |
| Closed circuit | |||
| Rear Height circuit | 5 and 1 12 and 3 |
Up | Closed circuit |
| Closed circuit | |||
| 5 and 12 1 and 3 |
Down | Closed circuit | |
| Closed circuit | |||
| Recline circuit | 5 and 11 8 and 3 |
Up | Closed circuit |
| Closed circuit | |||
| 5 and 8 11 and 3 |
Down | Closed circuit | |
| Closed circuit | |||
| Lumbar circuit | 5 and 7 10 and 3 |
Out | Closed circuit |
| Closed circuit | |||
| 5 and 10 7 and 3 |
In | Closed circuit | |
| Closed circuit |