LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Vehicle Certification Label >> Base Engine Calibration Information >> Notes

Base Engine Calibration Information: Notes

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

Base engine calibration information, also sometimes referred to as the powertrain calibration, is located in the lower right corner of the Vehicle Certification (VC) Label. Engine calibration information is limited to a maximum of 5 characters per line (2 lines maximum). Calibration information more than 5 characters long will wrap to the second line of this field. Only the base calibration will appear on this label. For more information on the Vehicle Certification Label or Engine Calibration, refer to IDENTIFICATION CODES .