LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1367 (Body Panel System - Uni-Body, SUBFRAME And Mounting System) >> Removal And Installation >> Subframe Bushings >> Installation

Subframe Bushings: Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the special tools to the front subframe with the new subframe bushing.
    2. Fig 1: Identifying Special Tool (204-362)
    GF0016992Courtesy of FORD MOTOR CO.
  2. Align the subframe bushing to the front subframe.
    1. Align the subframe bushing so that the voids are oriented in the fore-aft position.
    3. Fig 2: Aligning Subframe
    GF0016993Courtesy of FORD MOTOR CO.
  3. Press the new subframe bushing into the front subframe.
  4. Install the front subframe. For additional information, refer to Subframe - Front .
scientia non olet · About LEMON Manuals