Subframe and Mounting Systems
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
The front subframe is bolted to the body and:
- aids in structural support.
- provides the mounting surface for the steering gear, the front suspension lower arms and the stabilizer bar.
- front subframe bushings are serviceable.
The rear subframe is bolted to the body and:
- aids in structural support.
- provides the mounting surface for the rear suspension upper control arms, rear suspension lower control arms and (if equipped) a mounting location for the rear differential.
For body dimension specifications, refer to BODY REPAIRS article.