LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1362 (Engine Cooling System) >> General Procedures >> Cooling System Draining, Filling and Bleeding >> Filling and Bleeding with RADKITPLUS

Filling and Bleeding with RADKITPLUS

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For vehicles equipped with an optional rear heater, RADKITPLUS must be used whenever the underbody coolant lines and/or rear heater core are drained or removed.
  1. Install the RADKITPLUS and follow the manufacturer's instructions to fill and bleed the cooling system.
scientia non olet · About LEMON Manuals