Speaker Walk-Around Test (All Audio Systems Except Navigation)
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To enter the speaker walk-around test or ACM self-diagnostic mode, the ACM must be on and in radio tuner (AM/FM) mode.
- To enter the speaker walk-around test, simultaneously press the ACM preset buttons 3 and 6.
- The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the ACM in the following sequence: RF, LF, LR, RR, and SUBWOOFER.
- To exit the speaker walk-around test, turn the key to OFF, turn the ACM off, or press preset button 1 for diagnostics (DIA).