Normal Operation
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
The restraints control module (RCM) monitors the driver seat track position sensor circuits. If the RCM detects a current out of range condition, it will store DTC C1948 in memory and send a message to the instrument cluster module to flash a LFC 49 (or higher priority code if one exists) on the air bag warning indicator.
NOTE:
When monitoring fault and/or resistance PIDs with the scan tool, it may take up to 2 seconds for the scan tool display to update.
- DTC C1948 Front Driver's Seat Track Position Switch Circuit Resistance Out of Range - If the RCM detects a current out of range between forward and rearward on the driver seat track position switch, it will set this DTC.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Driver seat track position sensor
- RCM