Normal Operation
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
The restraints control module (RCM) monitors the driver safety belt buckle switch circuits for faults. If the RCM detects a current out of range fault, it will store DTC B2435 in memory and send a message to the instrument cluster module to flash a LFC 51 (or higher priority code if one exists) on the air bag warning indicator.
NOTE:
When monitoring fault and/or resistance PIDs with the scan tool, it may take up to 2 seconds for the scan tool display to update.
- DTC B2435 Drivers Seat Belt Buckle Switch Resistance Out of Range - If the RCM detects a current out of range between buckled and unbuckled on the driver safety belt buckle switch, it will set this DTC.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Driver safety belt buckle assembly
- RCM