DataLogger PID/Data
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
The DataLogger PID/Data option allows the scan tool operator to read the state of PIDs to aid in diagnosing the system. PIDs are real time measurements of parameters, such as voltages and resistances, calculated by the restraints control module (RCM)/occupant classification system module (OCSM) sent to the scan tool for display. Many of the PIDs supported by the modules are calculated periodically and are, therefore, not true real time readings.
To retrieve PIDs, follow these steps:
- Connect the scan tool to the DLC.
- Turn the ignition switch to the ON position.
- Follow the manufacturer's instructions for the scan tool being used.
- Select DataLogger.
- Select RCM or OCSM.