LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1353 (Interior Trim And Ornamentation) >> Removal And Installation >> D-Pillar Trim Panel - Taurus, Sable

D-Pillar Trim Panel - Taurus, Sable

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the C-pillar trim panel. For additional information, refer to C-Pillar Trim Panel - Taurus, Sable .
  2. If equipped with side curtain air bags, remove the screw from the D-pillar.
  3. Remove the D-pillar.
    • Pull the front inboard edge of the D-pillar trim panel down to release the retaining clips.
    • Gently pull the outboard retaining clips down.
    • Pull the D-pillar trim panel toward the front of the vehicle to remove.
  4. To install, reverse the removal procedure.