A-Pillar Trim Panel: Installation
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Install new upper and center A-pillar trim panel 2-stage high retention retaining clips.
- Install the lower A-pillar trim panel tabs into the instrument panel.
- Align the 3 A-pillar trim panel retaining clips and the A-pillar trim panel locator pin to the A-pillar retaining clip holes and the A-pillar locator hole.
- Install the A-pillar trim panel onto the A-pillar.
- Make sure that the 3 A-pillar trim panel retaining clips are seated correctly.