LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1350 (Automatic Transmission) >> In-Vehicle Servicing >> Transaxle Filler Tube >> Installation

Transaxle Filler Tube: Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Coolant hoses removed for clarity.
  1. Install the transmission fluid filler tube and the nut.
    • Tighten to 11 Nm (97 lb-in).
    2. Fig 1: Identifying Transmission Fluid Filler Tube
    GF0031643Courtesy of FORD MOTOR CO.
    NOTE: Coolant hoses removed for clarity.
  2. Install the transmission fluid level indicator.
    3. Fig 2: Identifying Transmission Fluid Level Indicator
    GF0031642Courtesy of FORD MOTOR CO.
  3. Route the coolant hoses to their position on the transmission fluid filler tube.
    4. Fig 3: Identifying Coolant Hoses From Transmission Fluid Filler Tube
    GF0031641Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals