Diagnostic Strategy: Diagnostics
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Carry out On-Board Diagnostic (OBD) procedures Key ON Engine OFF (KOEO) and Key ON Engine Running (KOER).
- Record all DTCs.
- Repair all non-transaxle codes first.
- Repair all transaxle codes second.
- Erase all continuous codes and attempt to repeat them.
- Repair all continuous codes.
- If only pass codes are obtained, refer to Diagnosis By Symptom for further information and diagnosis.
Follow the diagnostic sequence to diagnose and repair the concern the first time.