LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1350 (Automatic Transmission) >> Diagnostic Tests >> Diagnosis By Symptom >> Diagnosis by Symptom Index Directions

Diagnosis by Symptom Index Directions

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the Symptom Index, select the Concern/Symptom that best describes the condition.
  2. See the routine indicated in the Diagnosis By Symptom Index.
  3. Always begin diagnosis of a symptom with:
    1. Preliminary inspections.
    2. Verifications of condition.
    3. Checking the fluid levels.
    4. Carry out other test procedures as directed.
    4. NOTE: Not all concerns and conditions with electrical components will set a DTC. Be aware that the components listed may still be the cause. Verify correct function of these components prior to proceeding to the Hydraulic/Mechanical Routine listed.
  4. Begin with the Electrical Routine, if indicated. Follow the reference or action required statements. Always carry out the OBD tests as required. Never skip steps. Repair as required. If the concern is still present after electrical diagnosis, then proceed to the Hydraulic/Mechanical Routine listed.
  5. The Hydraulic/Mechanical Routines list possible hydraulic or mechanical components that could cause the concern. These components are listed in the removal sequence and by most probable cause. All components listed must be inspected to make sure of correct repair.
scientia non olet · About LEMON Manuals