LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1349 (Information Center) >> Removal And Installation >> Instrument Cluster (IC) Lens >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster (IC). For additional information, refer to Instrument Cluster (IC) .
  2. Release the retaining tabs and remove the instrument cluster (IC) lens.
  3. Fig 1: Locating Instrument Cluster Lens Retaining Tabs
    GF0018149Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.