Belt-Minder® Deactivating/Activating: Preparation
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Belt-Minder® deactivating/activating can also be carried out using the scan tool.
NOTE:
The driver and front passenger Belt-Minder® are deactivated/activated independently. When deactivating/activating one seating position, do not buckle the other position as this terminates the process.
- Before deactivating/activating the Belt-Minder®, set the parking brake.
- Place the transmission selector lever in PARK.
- Place the ignition switch in the OFF position.
- Unbuckle the driver and front passenger safety belts.