Key-In-Ignition Warning Chime
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
The key-in-ignition warning chime warns that the key is still in the ignition lock cylinder when the driver door is ajar. The key-in-ignition warning chime sounds when the driver door is ajar, the key is in the ignition lock cylinder and in the OFF/LOCK or ACC position.
The key-in-ignition warning chime stops sounding when the driver door is closed, the key is removed from the ignition lock cylinder, the ignition switch is turned to the ON position, or the battery saver has expired.
The key-in-ignition warning chime inputs are:
- Ignition switch RUN/START status
- Key-in-ignition switch position to the SJB
- Door ajar input from the driver door ajar switch to the SJB
- Key-in-ignition chime request communicated by the SJB to the instrument cluster (IC) through the MS-CAN