Roof Opening Panel Manual Operation
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the LH and RH A-pillar trim panels.
- Remove the LH and RH sun visor assemblies.
- Remove the overhead console.
- Open the bin and remove the screws.
- Disconnect the overhead console electrical connector.
- If equipped, disconnect the auto-dimming electrical connector from the interior rear view mirror.
- Pull down front of headliner to gain access to the roof opening panel motor.
- Insert an Allen wrench into the center of the manual drive hole. Rotate the Allen wrench counterclockwise until the roof opening panel is closed.