LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Lock Cylinder >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair package. The lock repair package includes a detailed instruction sheet to build the current key code of the vehicle.
  1. Remove the front exterior door handle reinforcement. For additional information, refer to Door Handle Reinforcement - Exterior, Front .
  2. Release the tab and remove the door lock cylinder.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals