- No communication with the Smart Junction Box (SJB)
|
- Wiring, terminals or connectors
- SJB
|
|
- No communication with the Instrument Cluster (IC)
|
- Wiring, terminals or connectors
- IC
|
|
- All door locks are inoperative
|
- Fuse
- Wiring, terminals or connectors
- SJB
|
|
- A single/more than one door lock is inoperative
|
- Wiring, terminals or connectors
- Door lock actuator
- SJB
|
|
- The door locks operate only one way
|
- Wiring, terminals or connectors
- SJB
|
|
- All door locks are inoperative from one switch
|
- Wiring, terminals or connectors
- Door lock control switches
|
|
- The luggage compartment lid latch release is inoperative/does not operate correctly
|
- Wiring, terminals or connectors
- Luggage compartment lid release switch
- Luggage compartment lid latch
- SJB
|
|
- The liftgate latch release is inoperative/does not operate correctly
|
- Wiring, terminals or connectors
- Liftgate release switch
- Liftgate latch
- Liftgate/Trunk Module (LTM)
- SJB
|
|
- The doors do not lock/unlock using the keyless entry keypad
|
- Wiring, terminals or connectors
- Keyless entry keypad
- SJB
|
|
- The keyless entry keypad illumination is inoperative/does not operate correctly
|
- Wiring, terminals or connectors
- Keyless entry keypad
- SJB
|
|
- The Remote Keyless Entry (RKE) transmitter is inoperative
|
- Integrated Keyhead Transmitter (IKT)
- IKT battery
- IKT button pressed a substantial amount of times while outside the range of the vehicle
- IKT programming
- SJB
|
|
- An individual button/feature is inoperative from the Remote Keyless Entry (RKE) transmitter
|
- Door locks
- Horn system
- Liftgate or luggage compartment lid release
- Turn signal system
- IKT
|
|
- The Remote Keyless Entry (RKE) transmitter has poor range performance
|
- IKT
- IKT battery
- Aftermarket systems
- High power devices
- TV/radio transmission towers
- SJB
|
|
- The autolock does not operate correctly
|
- Wiring, terminals or connectors
- Programming
- Door ajar switches
- SJB
|
|
- The smart unlock does not operate correctly
|
- Key-in-ignition switch
- Door ajar switch input
- SJB
|
|
- The Remote Keyless Entry (RKE) two step door unlocking does not operate correctly
|
- Two step door unlocking is disabled
|
|
- The memory seat does not operate correctly using the Remote Keyless Entry (RKE) transmitter
|
- SJB
- Driver Seat Module (DSM)
|
- ACTIVATE the remote memory. REFER to Remote Memory Activation . TEST the system for normal operation. If the remote memory is still inoperative, REFER to SEATING
article to diagnose the memory seat.
|