Front Suspension
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
The front suspension consists of the following components:
- Shock absorbers
- Coil springs
- Radius arms
- Wheel spindles
- LH and RH front I-beam axles
- Stabilizer bar
The front suspension system is a coil spring and shock absorber type design. The wheel spindles are attached to the front axles with ball joints. The axle is a twin I-beam, non-driving type that uses radius arms to control longitudinal movement.