LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1300 (Climate Control) >> Removal And Installation >> Air Conditioning (A/C) Cycling Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with 4.6L, 5.4L or 6.8L engine 

  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  2. Remove the battery.
  3. All vehicles 

  4. Disconnect the A/C cycling switch electrical connector.
  5. Fig 1: A/C Cycling Switch Electrical Connector
    GF0012683Courtesy of FORD MOTOR CO.
  6. Remove the A/C cycling switch.
  7. Fig 2: A/C Cycling Switch
    GF0012684Courtesy of FORD MOTOR CO.
  8. To install, reverse the removal procedure.
    • Install a new O-ring seal.