LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1298 (Fuel Charging System - Turbocharger) >> Diagnosis And Testing >> Turbocharger >> Component Tests >> Check Axial End Play

Check Axial End Play

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Radial shaft movement cannot readily be measured on this turbocharger.
  1. Position the Dial Indicator Gauge with Holding Fixture on the turbine end of the radial shaft and zero the indicator.
  2. Move the radial shaft back and forth by hand and record the reading.
  3. Fig 1: Moving Radial Shaft Back & Forth By Hand & Record Reading
    GF0044602Courtesy of FORD MOTOR CO.
  4. If readings exceed specifications, install a new CHRA  . Refer to Turbocharger Reconditioning .