LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1295 (Engine - 6.0L (99P E-Series) Diesel) >> In-Vehicle Servicing >> Oil Pan - Upper >> Installation

Oil Pan - Upper: Installation

WARNING: This page is about a different car, the 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Install a new press-in-place gasket.
  1. Install the upper oil pan and bolts.
    • Tighten to 13 Nm (10 lb-ft).
    2. Fig 1: Identifying Upper Oil Pan Bolts
    G03887278Courtesy of FORD MOTOR CO.
  2. Install the lower oil pan. For additional information, refer to Oil Pan - Lower .
scientia non olet · About LEMON Manuals