LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1290 (Automatic Transmission - 4R70E/W, 4R75E/W) >> In-Vehicle Servicing >> 1-2 Accumulator >> Installation

1-2 Accumulator: Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 1-2 accumulator.
    1. Install the 1-2 accumulator upper spring.
    2. Install the accumulator piston.
    3. Install the nested bottom inner and outer 1-2 accumulator springs.
    4. Install the cover and seal assembly.
    2. Fig 1: Identifying 1-2 Shift Accumulator Assembly
    GF0003534Courtesy of FORD MOTOR CO.
  2. Compress the 1-2 accumulator springs and install the accumulator piston retaining ring.
    3. Fig 2: Locating Accumulator Piston Retaining Ring
    G03888654Courtesy of FORD MOTOR CO.
  3. Install the transmission fluid pan and filter. For additional information, refer to Fluid Pan, Gasket and Filter .
scientia non olet · About LEMON Manuals