LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1290 (Automatic Transmission - 4R70E/W, 4R75E/W) >> Description And Operation >> Transmission Electronic Control System >> Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The output shaft speed (OSS) sensor is a magnetic pickup, located at the output shaft ring gear, that sends a signal to the PCM to indicate transmission output shaft speed. The OSS sensor is used for TCC control, shift scheduling and to determine EPC.

scientia non olet · About LEMON Manuals