LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1262 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the stoplamp switch electrical connector.
  2. Remove the cover and the stoplamp switch self-locking pin.
  3. Remove the stoplamp switch from the brake pedal assembly and the brake booster push rod.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals