Diesel Powertrain Control Software: Multiplexing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2005 Ford RV Cutaway, 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
The increased number of modules on the vehicle dictate a more efficient method of communication. Multiplexing is the process of communicating several messages over the same signal path. This process allows multiple modules to communicate with each other through the signal path (CAN2H/CAN2L). Modules communicate with the PCM using SCP or CAN communications, which determines the priority in which the signals are sent. Refer to STANDARD CORPORATE PROTOCOL (SCP) or HIGH SPEED CONTROLLER AREA NETWORK (CAN) for additional information.