LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1236 (Automatic Transmission External Control System - (Hybrid)) >> Removal And Installation >> Selector Lever Knob >> Installation

Selector Lever Knob: Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the selector lever knob and the 2 screws.
    2. Fig 1: Identifying Screws
    GF0042434Courtesy of FORD MOTOR CO.
  2. Install the selector lever knob trim covers.
    3. Fig 2: Identifying Trim Covers
    GF0042435Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals