Chart 12
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
- Warning Indicators: PTO, MIL, TCIL, Temperature Warning Indicator Lamp or Gauge (applications with CHT sensor only), Check Fuel Cap Indicator Lamp, ETC Indicator Lamp
- PTO not working correctly
NOTE:
| SYSTEM/COMPONENT | REFERENCE ( PINPOINT TEST - GASOLINE MODELS unless noted) |
|---|---|
| Verify the fuel filler cap is properly tightened. | Visual |
| Trucks with power take off (PTO) and MIL concern: PTO input to the PCM |
E-Series and F-Series: GO to PINPOINT TEST FB . |
| PTO Indicator never on, always on: PTO circuits |
E-Series and F-Series: GO to B: Power Take Off (PTO) STEP FB6 |
| PTO not working correctly: PTO operation |
E-Series and F-Series: GO to PINPOINT TEST FB . |
| MIL always on when the engine is running (no DTCs): MIL circuits |
Crown Victoria/Grand Marquis, Explorer Sport Trac, and Ranger: GO to PINPOINT TEST NB . |
| All others: REFER to INSTRUMENT CLUSTER . |
|
| TCIL always on when the engine is running (no DTCs): TCIL circuits |
Crown Victoria/Grand Marquis, Excursion, Explorer Sport Trac, E-Series, and Ranger: GO to B: Transmission Control Switch (TCS)/ Transmission Control Indicator Lamp (TCIL) STEP TB7. |
| All others: REFER to INSTRUMENT CLUSTER . |
|
| MIL never on:
(including the bulb check when the engine is first started): MIL circuits |
Crown Victoria/Grand Marquis, Explorer Sport Trac, and Ranger: GO to B: Malfunction Indicator Lamp STEP NB3. |
| All others: REFER to INSTRUMENT CLUSTER . |
|
| TCIL never on: TCIL circuits |
Crown Victoria/Grand Marquis, Excursion, Explorer Sport Trac, and Ranger: GO to B: Transmission Control Switch (TCS)/ Transmission Control Indicator Lamp (TCIL) STEP TB9. |
| All others: REFER to INSTRUMENT CLUSTER . |
|
| Temperature warning indicator lamp or gauge concerns (applications with CHT sensor only): Engine cooling system or lamp circuits |
If engine is overheating: REFER to ENGINE COOLING . Be aware that since a PCM DTC was not received, the PCM has not attempted to turn the lamp on. |
| If engine operates at normal temperature: GO to L: Cylinder Head Temperature (CHT) Sensor STEP DL28. |
|
| Check fuel cap indicator lamp always on or off: Check the fuel indicator lamp circuits |
Crown Victoria/Grand Marquis, Explorer Sport Trac, and Ranger: Indicator Lamp Always On, GO to X: Evaporative Emission (EVAP) Monitor and System STEP HX44. Indicator Lamp Always Off, GO to X: Evaporative Emission (EVAP) Monitor and System STEP HX45. |
| All others: REFER to INSTRUMENT CLUSTER . |
|
| ETC indicator lamp never/always on: ETC indicator lamp circuits |
REFER to INSTRUMENT CLUSTER . |
| Additional Testing | GO to PINPOINT TEST Z . |