LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1185 (Information Center) >> Removal And Installation >> Instrument Cluster (IC) Lens >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster (IC). For additional information, refer to Instrument Cluster (IC) .
  2. Remove the 2 instrument cluster (IC) lens and mask assembly screws.
  3. Release the 10 tabs on the lens and mask assembly and remove the lens and mask assembly from the instrument cluster (IC).
    4. Fig 1: Identifying Tabs
    GF0042653Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals