LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1171 (Exterior Lighting System) >> Removal And Installation >> Headlamp Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel side finish panel.
    2. NOTE: The headlamp switch is removed by pushing from behind.
  2. Release the tabs and remove the headlamp switch.
    • Disconnect the electrical connectors.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals