Power Point: Removal

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Power point cover may differ depending on location.

Open the power point cover.
Install the special tool in one of the power point socket slots.

Fig 1: Installing Special Tool In Power Point Socket Slot

Courtesy of FORD MOTOR CO.

Position the special tool so that it engages in the adjacent slot.

Fig 2: Positioning Special Tool To Engage In Adjacent Slot

Courtesy of FORD MOTOR CO.

Using the special tool, pull the power point socket out of the retainer.

Fig 3: Pulling Power Point Socket Out Of Retainer

Courtesy of FORD MOTOR CO.

Disconnect the electrical connector.