Turbine Shaft
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The turbine shaft connects the torque converter stator with the forward/coast/direct clutch cylinder. When applied, the forward/coast/direct clutch cylinder transmits input torque to the reverse/overdrive ring gear assembly, which also acts as the drive sprocket. This allows input torque to be transmitted from the torque converter to the drive chain and driven sprocket.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Converter clutch and dampener (part of 7902) |
| 2 | - | Reactor (part of 7902) |
| 3 | - | Turbine (part of 7902) |
| 4 | - | Impeller (part of 7902) |
| 5 | - | Fluid motion |
| 6 | - | Transaxle input rotation |
| 7 | 7F213 | Input shaft |
| 8 | - | Engine rotation |