LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1116 (Warning System) >> General Procedures >> Belt-Minder® Deactivating/Activating >> Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake before deactivating/activating the Belt-Minder®.
  2. Place the gear selector lever in PARK (P) (automatic transaxle) or NEUTRAL (N) (manual transaxle).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver and the front passenger safety belts.