System Airflow Description - EATC: Auto
WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
When AUTO is selected:
- The temperature control setting is manually set to the desired setting.
- The air inlet door actuator is automatically controlled by the EATC module, based on the temperature setting.
- The mode door actuators are automatically controlled by the EATC module based on the temperature setting.
- The A/C compressor is automatically controlled by the EATC module based on the temperature setting.
- The blower motor is ON. The blower motor speed is automatically controlled by the EATC module based on the temperature setting, but can be manually overridden.