Second Row Power-Fold Seat

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

For the second row power-fold seat to operate, voltage is supplied by the smart power distribution junction box (SPDJB) to the power-fold seat relay, enabling the seats to then be moved by pressing the second row power-fold seat switch. The second row power-fold seat operates only when the vehicle is in PARK and the liftgate glass or liftgate door is open.

The power-fold seat relay will be provided voltage on the coil side from the SPDJB for 30 minutes when the transmission selector is in PARK, and the liftgate, or liftgate glass, is open. The voltage will be disabled 30 minutes after turning the vehicle OFF. If the relay is disabled after 30 minutes, it can be enabled by opening any door, pressing the unlock key on the key fob, pressing any keyless keypad button or turning the ignition key.

The second row power-fold seat actuators release a locking mechanism allowing the seat backrest to fold down onto the seat cushion.