LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1111 (Seat System) >> Diagnostic Tests >> Seats >> Pinpoint Tests >> Pinpoint Test R: The Power Lumbar is Inoperative - Driver >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The seat control switch is powered by battery voltage on circuit SBP12 (GN/RD) and is supplied ground on circuit GD133 (BK). When the lumbar knob on the seat control switch is pressed, voltage and ground are supplied to the power lumbar motor. When pressing the lumbar knob in the opposite direction, the seat control switch reverses the polarity to the power lumbar motor, which moves the lumbar mechanism in the opposite direction.

scientia non olet · About LEMON Manuals