Digital Versatile Disc (DVD) Player: Installation
WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Hang the DVD player on the J-hooks.
- Connect the electrical connector.
- Remove the DVD player from the J-hooks.
- Align the left side guide pin with the left side locating hole.
- Lift up the right side of the DVD player and engage the U-hooks.
- Install the 4 screws.
- Push on the left and right sides of the DVD player to engage the clips.
- Download the DVD player configuration from the scan tool. For additional information, refer to MODULE CONFIGURATION .
NOTE:
Tilt the DVD player, as necessary, to align it correctly.