LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1102 (Instrument Cluster System) >> Diagnostic Tests >> Instrument Cluster (IC) >> Pinpoint Tests >> Pinpoint Test AF: DTC B2844 - Ignition Fault >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

DTC B2844 is a continuous memory DTC that sets in the instrument cluster if the instrument cluster senses voltage on the START/RUN input circuit CBP29 (WH/VT) without an interrupt between ignition switch positions or if ignition START or RUN is sensed without a key-in-ignition message from the smart junction box (SJB).

Possible Causes

scientia non olet · About LEMON Manuals