LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1094 (Handles, Locks, Latches And Entry Systems) >> General Procedures >> Remote Memory Activation

Remote Memory Activation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the driver seat and mirrors to the desired position.
  2. Press the set button on the driver door panel.
  3. Within 5 seconds press the 1 or 2 button on the driver door panel to associate with the driver 1 or driver 2 position.
  4. Press the set button again.
  5. Within 5 seconds press a button on the associated integrated key head transmitter (IKT).
  6. Within 5 seconds press the 1 or 2 button on the driver door panel to associate with the driver 1 or driver 2 position.
  7. If a second memory setting is desired, repeat the procedure with the second IKT.