Remote Keyless Entry (RKE) Operation
WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
The SJB receives a power liftgate activation command (double press) from the remote keyless entry (RKE) transmitter. The SJB will send a signal on the controller area network (CAN) to the LTM. The signal transmitted between the SJB and the LTM is not specific to open or close operation. The LTM will determine which operation to carry out depending on the liftgate position when the signal is received.