LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Warning System -- F250-F550 Super Duty) >> General Procedures >> Belt Minder Deactivating/Activating >> Preparation

Belt Minder Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before deactivating/activating the belt minder, apply the parking brake.
  2. Place the gearshift in the PARK position (automatic transmission) or the NEUTRAL position (manual transmission).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver safety belt.
  6. Place the headlamp switch in the OFF position.
scientia non olet · About LEMON Manuals