Window Glass - Rear Quarter: Removal
WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
WARNING:
Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this instruction may result in serious personal injury.
- Remove the C-pillar, D-pillar and rear quarter trim panels, For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- From inside the vehicle, using the special tool, cut the glass starting at the upper C-pillar and work down, across the D-pillar, then across the bottom.
- Remove the rear quarter window glass.
- Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.
NOTE:
Lubricate the existing urethane adhesive with water to aid the special tool while cutting.