Normal Operation
The LH and RH front power window control switches receive power from the delay accessory relay through circuit CBP41 (BU). The RH window motor receives battery power through circuit SBP01 (RD) and ground through circuit GD140 (BK/GN). When the LH or RH front window control switch is operated in the up position, the RH front window motor receives a voltage signal through circuit CPW13 (BN/YE). When the LH or RH front window control switch is operated in the down position, the RH front window motor receives a voltage signal through circuit CPW12 (GN/OG). When the RH front window motor receives a ground signal on circuit CPW31 (GN/WH), the RH front window motor will enter one-touch up/down mode.
This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- RH front window motor
- LH or RH front window control switch
- RH front window motor not initialized